The best water softener for rust will make your water safer for use and improve its taste. Combined with great quality materials and large capacity, the best water softener for rust will provide an all-round supply of safe water for your household for a long time.
If your water has an unusual metallic taste, it could have rust. It is common for water from sources such as wells to have a high iron concentration, which increases the likelihood of getting rusty. The best water softener for rust will improve the taste of your water and make it better for your consumption.
Why do you need a water softener?
While water softeners may look like convenience tools, they will help your households cut water costs and improve their health and safety. These are a few benefits of a water softening system to you.
Your skin and hair will be much softer than before. Soft water is gentler on the body than hard water, with the change to softer water also improving your clothes’ level of cleanliness. Your body and clothes will be exposed to lower oxidation levels.
Your tools, equipment and fixtures will have a longer life. Lime scale, which is caused by prolonged hard water usage, may cause glassware and other surfaces to become more prone to breaking. Using a water softener reduces this risk on your plumbing and in-home equipment. Your surfaces will have no stains or cloudy residue.
You will experience better energy efficiency, with guaranteed lower electrical bills for people who heat hard water. The lower heating bills may not be felt immediately, but will be enjoyed over a long period. You will also experience better soap efficiency since you will need less water to build up a lather.
What are the popular types of water softeners available?
Now you know the benefits of having one, it is important to find out the water softeners available. This will help you make the best choice for your household’s needs based on the efficiency, maintenance and installation requirements to get the most suitable softener for your needs.
Salt-based water softeners
They are the most popular type of water softener available, with many brands making a few salt-based options. They use an ion-exchange system to remove hard water mineral ions such as calcium and magnesium. These water cleaners will not increase the sodium level in your water. They may require regular maintenance in salt replacement. The units use sodium chloride salt which is readily available.
Salt-free water softeners.
These mostly feature inline protection from lime scale buildup and thorough filtration of unwanted mineral ions. They are not as effective as salt-based water softeners but can be great for the maintenance of your plumbing and fixtures
Resin-based dual tank water softeners
They are an upcoming type of water softener with great features such as auto-regenerating resin and an electronic top control valve. They are great for households with small to average consumption levels, and will provide soft water regularly. The dual tank system helps to provide a reserve, which can be used during regeneration of the other tank. It is a great water softening system for long-term use
This unconventional water softening system is used mainly to remove and prevent the buildup of lime scale in your plumbing and fixtures. It is easy to install with no need to detach any pipes. It will require you to roll a few coils around your main intake water pipe. This plugin device will create a great electromagnetic field, covering the pipes.
What is the best water softener for rust?
These are some of the best water softening units for a high concentration of rust.
Morton’s water softening unit offers convenient water softening even when it is undergoing auto-regeneration. This model can be tweaked to regenerate based on your water consumption level, which will help save water and resin.
It is an effective water softener for rust and other minerals popular in the home region. It features an in-built bypass valve to help maintain a steady supply.
- Auto-regeneration and maintenance
- Effective at softening water
- Has a designated rust remover
- Can create regeneration cycles on the basis if usage patterns
- Has a built in bypass valve for continued soft water use during regeneration
- Can be difficult to install without a guide
- Not compatible with outdoor use
- Smaller capacity might not be suitable for larger households
The Tier1 digital unit has an SXT top control valve for easier use. While it’s difficult to install, the model has durable parts which means it will offer lengthy service. It does not require a lot of maintenance.
This model will remove a whole range of contaminants, including rust, iron and sulfur. It will make your water feel and taste better. The model might have a limited capacity if intended for use in bigger households
- removes rust and other contaminants
- Includes 5600 SXT top control valve for a better experience
- Requires minimal maintenance
- efficient for very hard water
- Not suitable in freezing temperatures
- Capacity might be limited for larger households
The electronic descaler is mainly used to break down lime scale in your plumbing and fixtures. It only requires an electrically powered magnetic field, which does not involve pipe detachment.
While this model is not ideal for outside installation, it can be great for in-home use. It may consume more energy than other types of water softeners available.
- Easy installation
- Does not require pipe detachment
- Lifetime warranty guarantees long-term performance
- Great with lime scale
- Not ideal for outside installation
The Fleck 9100 SXT has a large 96000 grain capacity. This is one of the largest available water softening units on capacity. Users with bigger households will have an easier time with this model than they would other smaller capacity brands.
the model is great for softening water and remove any additional contaminants such as rust. It has a great top control valve, and will be very easy to replace the resin. This model should not be installed outside as it will be more prone to freezing and recontamination.
- Large 96000 capacity for larger households
- Easy to replace resin
- Maintains strong water pressure level
- Removes scale buildup
- Great top control valve
- Not ideal for outside installation
Nuvo’s DPHB is small and efficient in removing hard water mineral ions from your water. It will provide a sufficient supply of great tasting water, since it removes a lot of the contaminants.
The unit features a strong filter system. However, filter cartridges should be replaced often in very hard water because they are likely to wear out from cartridge damage. The model does not include connectors and is not universally sized. Care must be taken to avoid wrong installation and leakages.
- Better tasting water
- Efficient water softening system
- Does not have universally sized outlets
- Cartridges will require regular replacement
The salt-free Aquios FS-220 water softener is a great quality water softener alternative that does not use salt. It will consume a smaller space than other brands listed in this buying guide.
The model works well in removing chloramine and other contaminants. It is thorough and suited for contaminated hard water. however, very hard water might cause the filters to wear out quicker.
- Guarantees better tasting and cleaner water
- Well designed to take up less space
- Great for removing chloramine
- Might be prone to leaking
- Not ideal for heavy water
- Might require regular filter replacement
- Might require connectors
If you are looking for a water softener for rust that can be installed outside, the bullet poly triple action could be the right unit for you. Made with a high quality and durable BPA plastic, which is environmentally friendly. If you are considering outside installation, avoid any areas that could reach freezing point.
The model is great for very hard water. It will remove more contaminants than just the mineral ions which make water hard. Made with a great design, which will help to conserve space. Also includes additional fixtures and accessories to help customize the unit and to make the installation process easier.
- Great for very hard water
- Features durable BPA plastic
- Long warranty guarantees lengthy performance
- Great design
- Can be installed outside
- Might require additional connectors
Fleck’s Iron 2 Pro is designed to remove iron from water. It will make your water soft and remove several contaminants too. With this model, you will have a large supply of clean, soft water.
The model combines both a water softener and filter. This thorough combination ensures all water that passes through the unit becomes safe for use. It has a great top control valve, which is both easy to maintain and requiring little electricity to operate. The auto-regeneration process for this tank will make it great for users who do not have enough time to do it manually.
- Made with great quality materials
- Includes lengthy warranty
- Available in several large capacity sizes
- Removes sediments and other contaminants
- Great top control valve
- Can be difficult to install without professional help
The Fleck 5600 SXT features a top of the line top control valve. It is a great unit, with an average capacity for relatively smaller households. The model is designed to work well with hard water, from which it can extract different contaminants.
This unit will come equipped with different accessories, making it easy to install and operate. Made with great quality materials, with long warranties on the impressive top control valve. For users worried about spilling out the resin, these units also include a protective valve to protect against overfilling and potential loss of resin
- Includes protective safety float to protect against overfill
- Comes fully equipped with necessary accessories
- Will work well for heavy water
- Decent water capacity
- Might require more time to install than other models
ABCwaters built Fleck 5600 SXT offers the high quality of the Fleck 5600 SXT water softening unit with a more effective platform. This unit will remove a lot of the contaminants from your water, including iron, sulfur, rust and other mineral ions that may affect the taste and hardness of your water.
The brand will offer customer service between regular work hours in case of an emergency. If you are having trouble calibrating this model, consider looking into your water’s level of hardness first.
- Will remove a lot of the contaminants in your water
- Long warranties for top control valve and tanks
- Great quality materials
- Decent capacity size
- Auto-generates for prolonged soft water supply
- Great customer service
- Might be difficult to configure without knowledge of hard water levels
The Fleck Iron 2 Pro is my water softener of choice. I like that it is specially designed to remove iron from water, which means that it will be very effective for rusty water. The model is available in several large capacities, designed to fit the needs of larger households. The SXT top control valve and auto-regeneration feature makes it easy to monitor and use. It might not be suitable for users without sufficient space in their homes.