Are looking for the best electronic water softener? This Tier1 48000-Grain water softening unit could be exactly what you need to slow down the rate you replace your appliances. This Tier1 digital water softener review will provide insights into why this product is worth your money.
Tier1 is a well-known manufacturer of filtration products across the US. And this Tier1 48000-Grain water softener lives up to the expected standards offering the best hard water softening services for a long time.
Designed to soften hard water up to 48000 grains of hardness, you don’t have to worry about the two-hour regeneration cycle to hit when you need softened water badly. This water softener is, therefore, touted as one of the most efficient digital water softeners.
Tier1 Digital Water Softener will replace your traditional, mechanical water meter while guaranteeing the highest water softening performance for the longest time. According to the manufacturer, expect consistent and efficient water softening and appliance protection for a long time, thanks to the device’s WQA Gold Seal. This promise makes this Tier1 Digital Water Softener worth your consideration and even your money if you’re looking for a good quality digital water softener.
What to expect from this Tier1 48000-Grain Digital Water Softener
This water softer makes use of the traditional salt-based hard water softening system as it comes with brine and a mineral tank. For use, install the softener into your plumbing system at the point of entry (where water enters your home). It uses the ion exchange process for softening. In doing it trades hard water minerals for sodium.
In the mineral tank is resin polystyrene beads which carry negative ion charge. Since the primary minerals in hard water carry a positive charge–magnesium and calcium, these minerals cling to the resin as hard water flows through this mineral tank. Then there is the brine tank–it uses sodium/ common salt to create the brine. The brine tank also carries a positive charge from the sodium ions, but this charge is not as strong.
So, when the brine solution gets flushed through the system’s tank, it gets in contact with the resin that’s now saturated with the magnesium and calcium ions. When fully saturated, the water softening unit enters the three-phase regenerating cycle. The regenerating cycle involves flushing out the tanks to eliminate the hard water ions and to recharge the brine and mineral tanks. The phases of regeneration are Flush, Recharge, and Regenerate.
What makes this water softener one of the best is that at a 48000-grain capacity, you won’t have to worry about a daily regeneration cycle. If yours is a small family of four people and your hard water has a hardness of 20 grains, using about 300 gallons of water daily, the unit will treat about 6000 grains of hardness daily, giving you up to 7 days or more before regeneration. You can time the regeneration cycle for 2 or 3 am, once a week.
The downside of this water softener is that you have to understand the time regeneration cycle settings. This means more work, but it gives you total control over the device. The settings might appear challenging at first, but it all gets easier with time.
What are the key features of this unit?
Available in black and blue, this digital water softening unit is easy to install and maintain. It is suitable for the needs of every home. It comes with a digital meter control valve featuring a manual bypass. The unit also an LCD display, which eases the operation of the unit.
But this is not the only impressive feature of this water softener. The other features include:
A complete and efficient traditional system
This water softener comes with a brine and mineral tank. The pre-filled mineral tank has a 1.5 cubic feet of resin cations. Its control valve comes with a manual bypass valve, a brine tank, drain line and other mechanical components that ensure the effective softening of the water in your home.
High-grain handling power
Even though this water softener looks simple, it’s one of the most powerful hard water softeners available. It has a remarkable 48,000-grain handling capacity so depending on the grains of hardness of water in your home; this softener should run for a few days before its regeneration cycle. The determination of the regeneration cycle and the time it takes between cycles depends on the size of your household–this softener is demand-initiated. Note, however, that you’ll need an iron filter if the iron levels in the water exceed 3ppm.
Easy-to-Use Valve Head
For efficiency and convenience of water softening, this unit comes with fully adjustable regeneration cycle times. The valve head and the meter are easy to operate and also precise with the LCD display enhancing its ease of use. The settings are displayed in a language that easy to understand.
You could set the cycle either on a fixed regeneration timer, or you could set your preference depending on your needs.
This unit also makes use of a unique digital meter that gives you control over the water pressure and the flow rate as you’d like to have in your taps.
Besides softening water, this unit will prevent the buildup of lime scale.
For you to enjoy all these benefits and to say goodbye to itchiness from hard water, get yours today.
- Its compact design saves on space, and you can fit in a tight spot.
- It effectively softens hard water
- You have full control over the regeneration cycles
- It comes with everything you need
- It saves time and money–less soap used and appliances protected
- Could be installed outdoors too, as long as it doesn’t freeze
- An LCD screen with highly responsive buttons
- You may encounter minor difficulties attaching the adapter
This Tier1 digital water softener review clearly shows what a great job it does in softening hard water. It is one of the reliable water softeners on the market, especially for medium-sized families.